|Oxygen Ajustment:||Automatic||Oxygen Range:||21%~100%|
|Trend Review:||1,3,7 Days|
70L/Min High Flow Oxygen Delivery System,
Safe Airway High Flow Oxygen Delivery System,
70L/Min high flow nasal cannula system
Safe Airway Design 70L/min High Flow Oxygen Delivery System
HFNC is a heated and humidified system that allows prescribed fraction of inspired oxygen (FIO2) levels to be delivered at very high flow rates.
High Flow Nasal Cannula (HFNC) isn’t just a standard nasal cannula cranked up to very high flow rates. It actually takes gas and can heat it to 37℃ with a 100% relative humidity and can deliver 0.21~1.00% fio2 at flow rates of up to 70 liters/min. The flow rate and fio2 can be independently titrated based on your patient’s flow and fi02 requirements.
When HFNC is used to deliver oxygen, the flow rates are much higher than can be achieved with traditional nasal cannula. This results in a greater delivery of prescribed oxygen into the lungs, and less entrainment of room air. The oxygen you want to deliver to your patients is not prone to the same effect of dilution!
HFNC also exerts its effect by providing some variable positive pressure. By providing variable positive pressure, use of high-flow nasal cannula (HFNC) increases functional residual capacity (FRC) by about 25% compared to use of traditional nasal cannula.
During the pandemic, micomme provided over 7000 units of devices globally.
In 2020, micomme ranked the sixth in export of medical respiratory devices in China.
Automatic O2 concentration control technology
Effectively reduce the dead space with 70L/min high flow
Intelligent water-controlling system, automatically refills and maintains the optimal water level in the water chamber.
|Oxygen Adjustment Setting||Automatic|
|Oxygen Adjustment Range||21%- 100%|
|Low flow mode||2- 25L/min|
|High flow mode||10- 70L/min|
|Temperature settings||31℃- 37℃|
|Real time display parameters||Preset Flow, Preset FiO2, Preset Temperature, Treatment time|
|Trend review||1,3,7 days review|
|Content of review||Flow, FiO2, Temperature, Treatment time|
|Presetting of treatment time||Yes|
|Auto reminder of maintenance||Yes|
|Main device disinfection||No need disinfection for circuits system
Wipe disinfection for device surface
|Alarm||Tube alarm, oxygen pressure alarm, blocking alarm, water level alarm,
temperature alarm, power down alarm, low ambient temperature alarm,
FiO2 not reaching preset value alarm, flow not reaching preset value
alarm, reaching preset treatment time alarm